How do I choose the right pump for my pool

Updated

Each filtration system requires a specific pump and will only accept that pump (other pumps will not fit the filter).

Each liner will typically require a specific type of filter system (the liner openings are designed for that specific filter).

Filter systems are designed to use either submerged or non-submerged pumps.

Determine which type of filter canister is required:

Locate the filter canister model number.
- Check the filter canister label; it will be right before the words “Swimming Pool Pump”
Locate the pump model number.

Side Mounted

Free Standing

These systems requires to work in conjunction to one of the filter systems above

EX: UV Sanitation Systems - no longer offered

CURRENT VERSION	OLDER VERSION

Requires a liner manufactured with a large, round opening for mounting the canister. Metal Frame Pool Side-mounted filter canister Requires an X-style, internally mounted, water-cooled pump (round base seals, canister bottom) The pump is concealed within the canister The model number is stenciled in yellow characters below the pump discharge The pump is more difficult to remove With SFX330, the pump is held in place by 6 metal screws With all other SFX canisters, the pump is held in place by a large pump motor seal nut on the bottom of the canister Pump runs cooler and quieter, since it is inside the canister. Excellent for hot, dry environments	Requires a liner manufactured with a large, square(rectangular) opening for mounting the canister. Metal Frame Pool Side-mounted filter canister Requires an F-style, externally mounted, air-cooled pump (blocky, square pump) The pump is visible below the filter canister The model number is on the bottom of the pump The pump is easier to remove With SFS350/400, the pump is held in place by 4 metal screws With all other SFS systems, the pump is held in place by a retaining nut inside the canister The pump is louder, since it is outside of the canister

CURRENT VERSION	OLDER VERSION

Requires a liner manufactured with2 small circular openings, where hose-end attachments mount to the pool liner Inflatable Ring Pool or Metal Frame Pool Ground-mounted filter canister Requires an X-style, internally mounted, water cooled pump Pump is concealed within the canister Pump is more difficult to remove With RX330, the pump is held in place by a 6 metal screws With all other RX systems, the pump is held in place by a canister locking ring and red locking pin, on the bottom of the canister. Pump runs cooler and quieter, since it is inside the canister. Excellent for hot, dry environments	Requires a liner manufactured with 2 small circular openings, where hose-end attachments mount to the pool liner. Inflatable Ring Pool or Metal Frame Pool Ground-mounted filter canister Requires an F-style, externally mounted, air cooled pump Pump discharge is visible through hole in side of canister Pump is easier to remove With RP350/400, the pump is held in place by 4 metal screws With all other RP systems, the pump is held in place by a retaining nut inside the canister Pump is louder, since it is outside of the canister