How to find a pin hole

You can look for tiny holes in the liner if the pool is full of water. Follow these steps:

​

1. For holes on the side of the liner, look for a small stream of water seeping from the hole. These are often visible. Fix this hole with a patch. Use a dry patch if the hole is above the water level. Otherwise, you'll need a wet patch.

   ​

2. If you can't locate the hole, fill a bucket with soapy water and rub it on the pool walls with a wet cloth. The hole will produce bubbles in the soapy water where the leak is coming out. Fix this hole with a patch. Use a dry patch if the hole is above the water level. Otherwise, you'll need a wet patch.

   ​

You can use patches (either ones that came with your pool or ones you purchase from another retailer) to fix the hole. Using patches purchased from other retailers will not void your warranty.

​

​If a patch does not fix the issue, please contact our customer service at ​​​1-888-919-0070. You can buy patches and other pool components at polygroupstore.com