Why is my pump turning off?

IMPORTANT! The Filter Pump is protected by a thermal switch, a safety device that stops the pump from running when it is overheated, to prevent damage to the pump and prolong its service life. If your pump turns off automatically, it is likely that the pool water temperature is too high or the water flow through the pump is insufficient for cooling down the pump. Check and correct the water flow, and let the motor cool down for at least 15 minutes. The pump will restart after the motor is completely cooled down. You could also operate the pump at night when the temperature is lower. Timer --If the display screen of the GFCI plug shows "0", press the "SET" button to restart the pump. The timer settings will need to be reset. If the pump turns off automatically again, inspect if the rotor is damaged or is blocked by debris/dirt.