Frame Storage

Frame Storage

1. All parts should be cleaned with mild soap and lukewarm water. DO NOT use detergent or hot water.

   ​

2. Make sure all parts are dry before storing to prevent mildew.

   ​

3. Store all parts in a dry, heated area where temperatures do not go below 32° F or above 125° F.

   ​

4. Failure to follow the proper storage instructions could cause damage to pool parts and void warranty.

   ​

5. YOU MUST FOLLOW THE ASSEMBLY INSTRUCTIONS TO REASSEMBLE YOUR POOL NEXT SEASON. Pool site must be cleared and leveled again before setting up your pool.

​

​

Useful Tips

1. Pool components, including filter canister, liner, and frame can be stored in large plastic containers with lids to protect the parts.

   ​

2. Check the inside of the frame components for dirt and other debris and remove.

   ​

3. Keep an extra bag of pins and grommets in case you break one. You can purchase a bag of 10 at our online store or you may call Polygroup customer service at  1-888-919-0070.

   ​

4. Solar blankets, leaf covers, ladders, etc., should be cleaned and dried before storing.