VINYL REPAIR KIT

Larger Photo

Sorry, the item is currently out of stock.

VINYL REPAIR KIT

Price: $25.99

Stock Status: (Out of stock) (Out of stock)

Product Code: P5E35245AW01

WH Aisle: (Required)

WH Location: (Required)

Warehouses: (Required)

Adding to cart… The item has been added

Description

Assembly and Troubleshooting

A complete vinyl repair kit to repair large seam rips, holes, and tears in pool liners.

The kit can be used to mend and repair pools filled with water, so there is no need to drain your pool.

The kit contains:

4 to 5 Clear Vinyl patches (6" x 23" ) approximately 500 square inches.
4 ounces vinyl adhesive with dauber application cap

Part #: JED #35-245

We also carry different styles of patches, please see related products.

Inflatables: Apply solution to the patch sparingly, press the patch tightly to surface to be repaired. Allow to sit overnight before inflating.

NON - Inflatable : Note the area to be patched, make sure the size of the patch covers the seam/rip/tear completely. (You may need to cut patch to size) You can use tape to hold the patch in place. Apply adhesive sparingly on the patch reverse side (towards the pool liner) and press firmly. When the repair is dry you can remove the tape that was holding the patch in place.

Repairing Under water: Clean area around the hole with a cloth. Apply adhesive to the patch sparingly. Press the patch against the hole making sure to push any water between the patch and the liner out for a good seal.

Note- These patches are boxed with tissue between each vinyl patch so they do not stick to each other.

Vinyl Repair Kit for Pools

Vinyl Repair Kit with Glue # JED 35-245

A complete vinyl repair kit to repair large seam rips, holes, and tears in pool liners.
The kit can be used to mend and repair pools filled with water, so there is no need to drain your pool.
Please allow 1" beyond the rip, hole, or tear to repair.

The kit contains:

4 to 5 Clear Vinyl patches (6" x 23" ) approximately 500 square inches.
4 ounces vinyl adhesive with dauber application cap

Reorder Part #: JED # 35-245 / JED 35245

Inflatables: Apply solution to the patch sparingly, press the patch tightly to surface to be repaired. Allow to sit overnight before inflating.

NON - Inflatable : Note the area to be patched, make sure the size of the patch covers the seam/rip/tear completely. (You may need to cut patch to size) You can use tape to hold the patch in place. Apply adhesive sparingly on the patch reverse side (towards the pool liner) and press firmly. When the repair is dry you can remove the tape that was holding the patch in place.

Repairing Under water: Clean area around the hole with a cloth. Apply adhesive to the patch sparingly. Press the patch against the hole making sure to push any water between the patch and the liner out for a good seal.

Note- the patches are boxed with tissue between each vinyl patch so they do not stick to each other.

VINYL REPAIR KIT

REPAIR PATCHES SMALL FOR INFLATABLES & FAMILY POOLS (P53-0004) (BAG OF 2)

REPAIR PATCHES MEDIUM FOR POOLS, INFLATABLES AND BEDS (P53-0005) (BAG OF 2)