Round shaped Gasket that fits
RX & CP2000-C filtration systems
This fits:
- The lid and bottom of the RX600 and RX1000 filtration systems
- The lid of the CP2000-C filtration system to prevent leaks.
- Note some older SFX systems used this Round gasket, please check the style of your gasket.
It is recommended you regularly rub silicone lubricant on all gaskets or o-rings to ensure the seals are water tight.
Does NOT fit RX1500 canisters.
Please see the similar FLAT Motor Seal Canister Gasket for SFX600, SFX1000, SFX1500+PLUS below.
Rounded Motor Seal and Canister Gasket RX600 / RX1000 / SFX600 / SFX1000 / SFX1500+PLUS / CP2000-C
Does NOT fit SFX1500 canisters.
Rounded Gasket for RX600 / RX1000 / CP2000-C
Round shaped Gasket for
RX600 - RX1000 and
CP2000-C filtration systems.
This fits:
- The lid and bottom of the RX600 and RX1000 filtration systems
- The lid of the CP2000-C filtration system to prevent leaks.
- The gasket is 5mm diameter
- 138.2mm inner diameter
- 148.2mm outer diamter
It is recommended you regularly rub silicone lubricant on all gaskets or o-rings to ensure the seals are water tight.