FBS & SFX WATER STOPPER
Round Water Stopper.
The Round SFX Water Stopper fits in front of the opening on the inside of the pool, where the SFX Filtration system is attached.
This stopper blocks water from pouring out of the pool through the canister when troubleshooting the pump, or maintaining the system (ie: changing filters, pumps, etc.) The stopper needs to be held in place.
Fits ALL SFX Filtration systems.
- Only one stopper needed per SFX system.
- Please contact our customer service center at 1-888-919-0070 if you have any questions or concerns regarding your purchase.
The FBS/SFX Water Stopper fits in front of the opening to the FBS/SFX Filtration system to block water from pouring out of the pool through the canister. This Stopper is used when troubleshooting the pump, or operating on the system (ie: changing filters, pumps, etc.) The stopper needs to be held in place.
Fits ALL FBS/SFX Filtration systems.
Below are the service parts needed for each system configuration.
Service parts are shown separately in the accessories below
- FBS:
- Uses one FBS & SFX WATER STOPPER and one WATER SERVICE CAP FOR FITTINGS
- You may order 1 piece WATER STOPPER & WATER CAP SET or order the parts separately
- SFX with Jet Maxx return fitting:
- Uses one FBS & SFX WATER STOPPER and one WATER SERVICE CAP FOR FITTINGS
- You may order 1 piece WATER STOPPER & WATER CAP SET or order the parts separately
- SFX with normal return fitting:
- Uses one SERVICE PLUG and one FBS & SFX WATER STOPPER
- Order parts separately
- FB/RX, CP2000-C and Sand Filtration systems with 3 small round holes in liner:
- Uses one SERVICE PLUG and two WATER SERVICE CAP FOR FITTINGS
- Order parts separately
- FB/RX, CP2000-C and Sand Filtration systems with 2 small round holes in liner:
- Uses one SERVICE PLUG and one WATER SERVICE CAP FOR FITTINGS
- Order parts separately
The accessories below should be ordered separately and/or as described above as needed for troubleshooting filtration systems.