SUCTION SKIMMER FITTING ADAPTER

Larger Photo

Sorry, the item is currently out of stock.

SUCTION SKIMMER FITTING ADAPTER

Price: $24.99

Stock Status: In Stock (Out of stock)

Product Code: P5810233AP01

WH Aisle: (Required)

WH Location: (Required)

Warehouses: (Required)

Adding to cart… The item has been added

Description

Assembly and Troubleshooting

Special Pool Vacuum Adapter Attachment for Suction fittings.

This special adapter allows you to connect a pool vacuum to filtration systems that do not have skimmers, and only have suction and return fittings.

This special adapter will allow you to attach a vacuum hose and head to:

RP Filtration systems (all sizes)
RX Filtration systems (all sizes)
CP2000-C
and both Polygroup Sand Filtration systems!

This Pool Vacuum adapter attaches to all Polygroup suction fittings to act as a connection for a vacuum hose. Adapter has different sizing areas to connect to both 1.25" and 1.50" O-ring / hose connection sizes.

Previously under # 04Q102331P01

This adapter may be used to connect a Polygroup pool vacuum hose and vacuum head included in any Polygroup Deluxe Maintenance Kit or purchased from polygroupstore.com. The adapter needs to be screwed onto the suction fitting like the suction fitting cap on the inside of the pool.
When using this adapter with Polygroup Filtration systems: First connect the adapter to the suction fitting.
Once connected please connect a 1.25 or 1.50 inch vacuum hose and the vacuum head for vacuuming. The hose should be completely submerged and filled with water before vacuuming.
IMPORTANT: When using the filter system's normal filtration setting to vacuum the pool, dirt and debris will be caught in the sand bed or in the filter cartridge. Check every few minutes for excess dirt and debris build up and clean the sand bed or filter cartridge as needed. The sand or filter cartridge should be cleaned or replaced once you have completed vacuuming.
CAUTION: When using a Polygroup Sand Filtration system to drain or vacuum your pool using the WASTE setting: You must remove the drain cap on the 6-port valve before you start. Please note that the water flows directly from the pool to the drain at a rate of 1,100 gallons per hour and possibly more than 1,600 gallons per hour. The water in your pool will drain at that same rate when using the WASTE setting. Take precautions as water flowing at these rates should be diverted from dirt or garden areas as the water flow may cause accelerated erosion to the area where the water flow is directed.

Vacuum Adapter Attachment

Suction Fitting Adapter

Suction Skimmer Fitting Adapter

This fitting can be used to connect:

The Surface Skimmer to The Suction Fitting On The Inside Pool Wall
As an Adapter to the Suction fitting to connect a Polygroup Vacuum hose

The adapter can be connected to the suction fittings on any of Polygroup's filtration systems below:

RP
RX
CP2000-C
Both Sand Filtration system sizes ST1100 and ST1600

Previously Under Product Code: 04Q102331P01

This adapter may be used to connect a Polygroup pool vacuum hose and vacuum head included in any Polygroup Deluxe Maintenance Kit or purchased from polygroupstore.com. The adapter needs to be screwed onto the suction fitting like the suction fitting cap on the inside of the pool.
When using this adapter with Polygroup Filtration systems: First connect the adapter to the suction fitting.
Once connected please connect a 1.25 or 1.50 inch vacuum hose and the vacuum head for vacuuming. The hose should be completely submerged and filled with water before vacuuming.
IMPORTANT: When using the filter system's normal filtration setting to vacuum the pool, dirt and debris will be caught in the sand bed or in the filter cartridge. Check every few minutes for excess dirt and debris build up and clean the sand bed or filter cartridge as needed. The sand or filter cartridge should be cleaned or replaced once you have completed vacuuming.
CAUTION: When using a Polygroup Sand Filtration system to drain or vacuum your pool using the WASTE setting: You must remove the drain cap on the 6-port valve before you start. Please note that the water flows directly from the pool to the drain at a rate of 1,100 gallons per hour and possibly more than 1,600 gallons per hour. The water in your pool will drain at that same rate when using the WASTE setting. Take precautions as water flowing at these rates should be diverted from dirt or garden areas as the water flow may cause accelerated erosion to the area where the water flow is directed.

SUCTION SKIMMER FITTING ADAPTER

SUCTION FITTING SET FOR ALL 1.25" FILTER SYSTEMS IN GRAY(RP & RX)

SUCTION FITTING SET FOR ALL 1.50" FILTER SYSTEMS IN GRAY (078-110284-SET)

WATER SERVICE CAP FOR FITTINGS