WATER SERVICE CAP FOR FITTINGS

Plastic Water SERVICE Cap for all Filter Systems that use newer return fittings and all suction fittings.

Keeps water from exiting the pool while servicing the filter system. For service use only.

Below are the service parts needed for each system configuration.

Service parts are shown separately in the accessories below

• FBS: 
  • Uses one FBS & SFX WATER STOPPER and one WATER SERVICE CAP FOR FITTINGS
  • You may order 1 piece WATER STOPPER & WATER CAP SET or order the parts separately 

• SFX with Jet Maxx return fitting:
  • Uses one FBS & SFX WATER STOPPER and one WATER SERVICE CAP FOR FITTINGS
  • You may order 1 piece WATER STOPPER & WATER CAP SET or order the parts separately 

• SFX with normal return fitting:
  • Uses one SERVICE PLUG and one FBS & SFX WATER STOPPER
  • Order parts separately

• FB/RX, CP2000-C and Sand Filtration systems with 3 small round holes in liner:
  • Uses one SERVICE PLUG and two WATER SERVICE CAP FOR FITTINGS
  • Order parts separately

• FB/RX, CP2000-C and Sand Filtration systems with 2 small round holes in liner:
  • Uses one SERVICE PLUG and one WATER SERVICE CAP FOR FITTINGS
  • Order parts separately

The accessories below should be ordered separately and/or as described above as needed for troubleshooting filtration systems.

Previously under part number 078-110282.

Please note reference only------
In the accessories below is a Suction skimmer fitting. This product was created so that a Suction fitting could be connected to a maintenance kit. It is not included with our pools, but is sold on the store site for consumers who wish to use this option.